Wire mesh belt 5-heddle mesh China direct factory
Stainless steel wire mesh belt is divided into reversed dutch weave mesh belt and five heddle mesh belt according to different weave type.
Reversed dutch weave mesh belt
Reversed dutch weave mesh belt is produced of more thin warp wires and fewer but large weft wires.Thinner and closer warp wires together with the weft wires form triangular shapes transversal openings.This structure increase the degree of stability and optimal resistance to high pressure.
Material: stainless steel wire 304, 316 or 316L.
Roll width: 67mm, 95mm, 97mm, 127mm, 133mm, 150mm, 157mm,300mm, 400mm, etc.
Roll length: 10m, 20m,etc.
Weaving methods: reverse plain dutch weave, reverse twill dutch weave.
Packing:with paper tube inside to reduce loading pressure,then wrapped with moisture paper outside.then placed in wooden case.
|Reverse Dutch Weave Belts|
|Weave of Type||Mesh/Inch||Wire Diameter
|TRD||48 x 10||0.50 X 0.50||400|
|TRD||72 x 15||0.50 x 0.50||300|
|TRD||132 x 14||0.35 x 0.45||200|
|TRD||132 x 18||0.35 x 0.44||180|
|TRD||152 x 24||0.27 x 0.40||160|
|TRD||152 x 30||0.27 x 0.30||130|
|RPD||250 x 40||0.15 x 0.25||90|
|RPD||260 x 40||0.15 x 0.27||125|
|RPD||280 x 70||0.089 x 0.21||45|
|RPD||325 x 39||0.13 x 0.24||55|
|RPD||600 x 125||0.043 x 0.12||20|
720 x 150
0.035 x 0.107
Five heddle mesh
Five heddle is weaved by passing every warp wire alternately up and down each single and four shute wires and vice versa.This weave type make it be very effectively cleaned and offers a rectangular opening with high flow rating and excellent mechanical stability.
And it offers a smooth surface which is always used in petroleum and chemical industries.
Five heddle mesh specification
|Meshes per inch
Warp x Weft(mesh)
|Wire Diameter (mm)||Aperture (mm)
Warp x Weft
|Open Area %||Weight (kg/m2)|
|108 X 59||0.160||0.075 X 0.271||20||1.07|
|110 X 60||0.160||0.071 X 0.263||19||1.09|
|38 X 38||0.150||0.518 X 0.518||60||0.43|