Spinning mesh filter BOPP filter for BOPP%vinyl film process line
Spinning mesh filter is also known as BOPP filter/extruder filters,included spinning filter,spin pack and ring,used for BOPP production line.Hanke can supply the whole filter systems of BOPP production.
The production of plastic requires a high degree innovation among producers and equipment suppliers. Hanke is able to combine core polymer filtration production needs with new and innovative ideas to optimize filtration solutions.We can supply the sets of spinning filters to help you produce good quality polymer and reduce your production cost.
Spinning filter element
This filter is a cylindrical filter equipped with pleats to improve the filter rate.it is made of find woven wire mesh which is usually used where the fluid enters and leaves a containers or component.Hole of the wire meshes varies with the particular filter element while the wire mesh filter element removes normally only the larger particles of contamination from the fluid.
We will customize filters according to customer needs in different sizes from standard size to special-ordered size.
Spinning/extruder filter pack
Combining multi filters with different mesh sizes by edge/rim, we offer filters exhibiting higher strength and higher efficiency.
We possess a variety of the press dies including filter with a general circle shape as well as the press dies in a ring shape and track type of the press dies.
Filter pack specification
The filter packs are usually made of fine mesh for filtration and coarse mesh to support.
Shapes of Spin Pack Screens:
1.Round Shaped Packs: Diameter 25 to 600 mm(or as customized)
2.Toroidal Shaped: Inner diameter 18 mm to 250mm
Outer diameter 50mm to 350mm
3.Rectangular Shaped: width 30mm to 100mm,length 60mm to 400mm(or as customized)
4.Slitting Belt: the minimum width 30mm
5.Cylinder Shaped:inner diameter from 8mm to 600mm
6.Square Shaped,Oval Shaped,other type filter
|Material||Stainless steel,low carbon steel,copper,alloy,etc|
|Rim/edge||SS,,Al,copper or without edge,with gap or not|
|Bonding||Spot welded or with rim|
|Filter media||Woven wire mesh or sintered mesh|
The rings are always made of aluminium or stainless steel
widely used in plastic industrial for PP, PS, PVC, PET and Chemical Fibers etc.