services_banner

Factory wholesale Self Cleaning Sediment Filter - Stainless steel 10micron filter housing bag filter housing direct factory – Hanke

short description:


Product Detail

Product Tags

Bag filter housing is a kind of multi-purpose filtration equipment with novel structure, small volume, simple and flexible operation, energy saving, high efficiency, closed work and strong applicability.

 Specification:

 

Bag filter housing is a kind of pressure filter device, which is mainly composed of three parts: filter container, supporting net and filter bag.

 

 

 

Model HKV65-1
Components Filter cylinder,cover,quick opening mechanism,filter bag reinforcing mesh
Minimum filter rate 0.5 μ M
Surface treatment mirror polishing, sandblasting, etc
Import and export form flange, quick mounting, thread
Specifications can be customized

 

 

Working principle

Bag filter housing is a kind of pressure type filter device. The filtrate flows into the filter bag through the side inlet pipe of the filter shell. The filter bag itself is installed in the reinforcing basket. The qualified filtrate can be obtained when the liquid penetrates through the filter bag of the required fineness grade, and the impurity particles are blocked by the filter bag Cut. It is very convenient to change the filter bag, and there is no material consumption.

 

 

filter housing

 

 operation and precautions

 

 Simple operation. When used, it only needs to install the filter bag of the required fineness grade in the filter cartridge, check whether the O-ring is in good condition, and then tighten the ring bolt of the filter cartridge cover to put it into operation.

 

After start the pump, the pressure gauge on the filter rises slightly, and the initial pressure is about 0.05Mpa. With the extension of service time, the filter residue in the cylinder increases gradually. When the pressure reaches 0.4MPa, the cylinder cover should be opened to check the residue in the filter bag, and the filter bag can be replaced to continue to use (the filter bag can be reused after cleaning).

 

The filter pressure is generally adjusted at 0.1-0.3mpa, which can be adjusted through the return pipeline or the return valve on the pump. If the filter pressure is too high, it will damage the filter bag and the protection net, so special attention should be paid. 

 

Advantage of bag filter housing

1.small side leakage probability of the filter bag is small, which effectively ensures the filtering quality.

2.Bag filter housing can bear more working pressure, with small pressure loss, low operation cost and obvious energy saving effect.

3.Continuous improved filtration rate,has reached 0.5 μ M now.

4. Large capacity, small volume and large capacity.

5.It is convenient and fast to replace the filter bag, and the filter is free of cleaning, saving labor and time.

6.Repeated use, the cost can be saved.

7. wide range of applications, flexible use and various installation methods.

 Scope of application:

Filter housing is widely used in machine tool grinding fluid, coating, paint, beer, vegetable oil, medicine, chemicals, cosmetics, petroleum products, textile chemicals, photosensitive chemicals, electroplating solution, milk, mineral water, hot flux, latex, industrial water, sugar, resin, ink, fruit juice, edible oil, wax and other industries.

图片1_副本

Specification:

Bag filter is a kind of pressure filter device, which is mainly composed of three parts: filter container, supporting net and filter bag.


  • Previous:
  • Next:

  • Write your message here and send it to us

    Product categories